RTUEE / EC / EEEYr 2019 · Sem 8

Radar and TV Engineering

10 questions

Q116 marks

1. a) What is the necessity of delay line canceller? Describe various types of delay lines using an MTI radar. [2x4=8]

b) What is blind speed? Calculate the minimum blind speed for a Radar, Which is operating at a frequency 20GHz and sends 1000 pulses per second. [8]

Show Answer
Q116 marks

1. a) Explain the: i) Aircraft landing and ii) Aircraft tracking systems. [2x6=12]

b) Explain the working of different marker beacons used in radar navigational aids. [4]

Show Answer
Q216 marks

2. a) Explain the working of CCD camera tubes and compare their performance with other camera tubes. [8]

b) Calculate the peak value of resultant signal when saturated yellow colour is added to the luminance Y signal. [4]

c) Determine the resultant peak signal when luminance signal is white and the resultant colour difference signals are added to it. [4]

Show Answer
Q216 marks

2. a) What do you understand by interlaced scanning? Show that interlace scanning reduces the flicker. [8]

b) Sketch composite video signal waveform for atleast three successive line and indicate: i) Extreme white level ii) Blanking level iii) Pedestal height iv) Front porch and back porch. [8]

Show Answer
Q316 marks

3. a) Explain the phenomenon of interleaving of colour signals. How does it help in ensuring compatibility? [8]

b) Write a note on weighting factors. Give the weighting factors for U and V. [8]

Show Answer
Q316 marks

3. a) Justify the use of vestigial side band transmission for TV system. Draw the frequency band for channel III and IV in third band and show their respective sound carrier and colour sub carrier frequencies. [4+4=8]

b) Explain the compatibility issues related to colour and monochrome TV system. [8]

Show Answer
Q416 marks

4. a) Explain the need of attenuating IF video signal within +/-0.75MHz of the video IF carrier. Draw the shape of the frequency response curve before detection and after detection. [8]

b) Explain the need and working of AFC circuits. [8]

Show Answer
Q416 marks

4. a) Draw the circuit diagram for: i) Horizontal and vertical sync separator ii) RF tuner iii) EHT generator iv) AGC. [4x2=8]

b) Explain the use of: i) Delayed AGC ii) Simple diode detector iii) Pilot carrier scheme for colour sub carrier signals iv) Quadrature modulation in chrominance signal. [4x2=8]

Show Answer
Q516 marks

5. Write the short notes on any Two: i) Modern TV receiver with LCD, LED and plasma displays ii) DISH TV iii) IPTV. [16]

Show Answer
Q516 marks

5. a) Explain transmission and reception process of digital TV system. [8]

b) Write the name of common faults and their diagnosis in TV receiver. [8]

Show Answer